you are here > News

+ News

Weaving requirements of stainless steel rope mesh green wall

Date : 2021-06-01 Hot : 346

The weaving of stainless steel rope mesh green wall shall meet the following requirements:

1. Staggered up and down.

2. Stainless steel wire rope woven into net shall not be broken or scattered.

3. The cross joint shall be fixed with crimping parts, and the joint shall be crimped with lap joint. This step shall not be omitted. The length of lap joint with exposed wire rope shall be at least 10 mm.

4. When weaving the mesh, the crimping part and the lap part should be mechanically crimped, and the surface should not have cracks or obvious damage. The shape of the net shall be flat and the rope shall not be knotted or obviously twisted.

In addition, stainless steel rope mesh green wall is also used in the field of protection and guardrail. For example, highways, parking lots and parks. The reason why Steinless steel rope mesh green wall can be used in the field of guardrail instead of guardrail is that it has the advantages of light weight, high strength, flexibility, fatigue resistance, impact resistance, breaking force, durability and long service life. In addition, because of these characteristics of Steinless steel rope mesh green wall, it is closer to nature and green environmental protection.

Previous : What are the common types of decorative mesh for exterior wall cladding?

Next : none

Related articles

  • Aluminum ceiling panels in the living room

    Aluminum ceiling panels in the living room: It is bound to take the atmosphere as the rule, rather than excessive modeling. Sometimes when there are more modeling, it is not only expensive, but also ...

  • In ancient times, we thought about other taboos of perforated metal ceiling color

    Perforated metal ceiling can be compared to the whole sky or the starry sky, which is relative to the color and decoration. With the same color, it's important that it's related to what you like. In a...

  • The physiological functions of mesh architecture are as follows

    The physiological functions of mesh architecture are as follows:Mesh architecture is a crisscross neural network structure scattered between the medulla oblongata and hypothalamus. Its function is rel...

  • Selection of scale mesh curtain pattern and stripe

    Selection of scale mesh curtain pattern and stripe: At present, most of the fabrics that can be used as scale mesh curtain have patterns and patterns. Generally speaking, the fabrics used as...

  • Perforated mesh screen

    Perforated mesh screen The house consists of two interconnected spaces; a long exposed concrete box extending into a reflection pool, and a high vertical rendering structure. The simple form and fini...

  • Effect of mesh cladding additive on crack control

    Effect of mesh cladding additive on crack control:Mesh cladding is a new type of surface strengthening technology, but mesh cladding crack is the main problem limiting its application. The participati...

  • What are the punching methods of perforated metal mesh?

    What are the punching methods of perforated metal mesh? 1. Continuous blanking in the same direction: long holes and trimming can be processed by using partially overlapped rectangular punching net di...

  • Brief introduction of architectural ring mesh

    Brief introduction of architectural ring mesh: 1、Time: the network can automatically recover the service from the failure in a very short time (50ms), so that users can hardly feel the existence of th...

leave your message