you are here > News

+ News

What are the external decorations of cars?

Date : 2021-02-10 Hot : 229

What are the external decorations of cars?

The external decoration of automobile mainly covers the top cover, window, periphery of automobile body and wheels. Its main contents:

(1) Special spraying decoration of automobile paint surface.

(2) Color strip and protective film decoration.

(3) The front evil wind board is decorated with the rear wing board. 
(4) Roof skylight decoration. 
(5) Automobile windshield decoration. 
(6) Body surrounding decoration. 
(7) Local body decoration. 
(8) Wheel decoration. 
(9) Plastic spraying protection decoration for chassis. 
(10) chassis LED strip decoration.

What are the main contents of facade decoration

What's the facade? Door head, external paint, or aluminum-plastic board, marble, ceramic tile, etc. What does the external decoration of a car include The external decoration of automobile mainly covers the top cover, window, periphery of automobile body and wheels. Its main contents: 
(1) Special spraying decoration of automobile paint surface. 
(2) Color strip and protective film decoration. 
(3) The front evil wind board is decorated with the rear wing board. (4) Roof skylight decoration. 
(5) Automobile windshield decoration. 
(6) Body surrounding decoration. 
(7) Local body decoration. 
(8) Wheel decoration. 
(9) Plastic spraying protection decoration for chassis. 
(10) chassis LED strip decoration. 

What are the contents of the decoration project?

 Decoration engineering is a complicated matter, which contains many projects, and every project needs to be completed in cooperation with each other. Decoration projects include such projects:

1. civil engineering renovation: make good trunking, bottom box and wall demolition as planned. 
2. Hydropower hidden works: divide the strong and weak electricity into sections and slots, and then thread them with steel wires. 
3. Mud work: After the waterproof work is done, conduct a 48-hour water shut-off test, paving the kitchen and bathroom walls and floor tiles, leveling the ground, and secretly applying the line pipe. 
4. Woodwork project: local ceiling, modeling treatment, and cabinet production. 
5. Painting project: leveling putty for three times, grinding it with sandpaper, rolling the primer once, brushing the top coat twice, and grinding it again.
6. Installation works: installation of lamps, sanitary ware, switches, panels and hardware pendants.
7. Cleaning: notify the owner for acceptance after clearing land reclamation.

 


Previous : What is Building Cladding?

Next : decorative mesh for exterior wall cladding

Related articles

  • Aluminum ceiling panels in the living room

    Aluminum ceiling panels in the living room: It is bound to take the atmosphere as the rule, rather than excessive modeling. Sometimes when there are more modeling, it is not only expensive, but also ...

  • In ancient times, we thought about other taboos of perforated metal ceiling color

    Perforated metal ceiling can be compared to the whole sky or the starry sky, which is relative to the color and decoration. With the same color, it's important that it's related to what you like. In a...

  • The physiological functions of mesh architecture are as follows

    The physiological functions of mesh architecture are as follows:Mesh architecture is a crisscross neural network structure scattered between the medulla oblongata and hypothalamus. Its function is rel...

  • Selection of scale mesh curtain pattern and stripe

    Selection of scale mesh curtain pattern and stripe: At present, most of the fabrics that can be used as scale mesh curtain have patterns and patterns. Generally speaking, the fabrics used as...

  • Perforated mesh screen

    Perforated mesh screen The house consists of two interconnected spaces; a long exposed concrete box extending into a reflection pool, and a high vertical rendering structure. The simple form and fini...

  • Effect of mesh cladding additive on crack control

    Effect of mesh cladding additive on crack control:Mesh cladding is a new type of surface strengthening technology, but mesh cladding crack is the main problem limiting its application. The participati...

  • What are the punching methods of perforated metal mesh?

    What are the punching methods of perforated metal mesh? 1. Continuous blanking in the same direction: long holes and trimming can be processed by using partially overlapped rectangular punching net di...

  • Brief introduction of architectural ring mesh

    Brief introduction of architectural ring mesh: 1、Time: the network can automatically recover the service from the failure in a very short time (50ms), so that users can hardly feel the existence of th...

leave your message