you are here > News

+ News

How to make metal coil drapery?

Date : 2021-02-10 Hot : 215

How to make metal coil drapery?

1. Firstly, measure the dimension Du of the hole with tape measure, and make good structure with wood.

2. Then prepare the blinds and let Shu use the door strip of the old metal coil drapery door.

3. Then use a tape measure to measure the width of the structure, take a piece of the door strip of the old metal coil drapery door, and saw it into a short film, which is about 1 cm shorter than the structure.

4. Then the sawn door strips are arranged in the width direction of the structure.

5. Pay attention to placing the top piece from the bottom of the structure. The bottom edge of the second piece should be placed at the top edge of the top piece, just covering the roll groove of the top piece.

6. In this way, the second, third and fourth pieces are placed well. Pay attention to the film between the film to be tight. Press one piece on the other.

7. Then use pencil to draw the corresponding orientation of the upper roll groove of each shutter. Draw two sections of structure together.

8. Drill with electric drill. Generally, the size of the hole is smaller than that of the door slot. 4 or 5 mm hole.

9. Pass the iron nail through the hole and put it in the door slot. Make sure that both ends are installed in the same top position.

10. Then use wire pliers to clamp the door slot a little, as long as the nail does not slide out of the slot.

11. In this way, many pieces are installed, thus forming a metal coil drapery.

Previous : Metal coil drapery mainly includes

Next : Key points for purchasing metal coil curtain

Related articles

  • Metal coil drapery mainly includes

    Metal coil drapery mainly includes:Electric metal coil drapery, bead metal coil drapery and spring metal coil drapery. Metal coil drapery has many advantages, such as beautiful and concise surface, vi...

  • Aluminum ceiling panels in the living room

    Aluminum ceiling panels in the living room: It is bound to take the atmosphere as the rule, rather than excessive modeling. Sometimes when there are more modeling, it is not only expensive, but also ...

  • In ancient times, we thought about other taboos of perforated metal ceiling color

    Perforated metal ceiling can be compared to the whole sky or the starry sky, which is relative to the color and decoration. With the same color, it's important that it's related to what you like. In a...

  • The physiological functions of mesh architecture are as follows

    The physiological functions of mesh architecture are as follows:Mesh architecture is a crisscross neural network structure scattered between the medulla oblongata and hypothalamus. Its function is rel...

  • Selection of scale mesh curtain pattern and stripe

    Selection of scale mesh curtain pattern and stripe: At present, most of the fabrics that can be used as scale mesh curtain have patterns and patterns. Generally speaking, the fabrics used as...

  • Perforated mesh screen

    Perforated mesh screen The house consists of two interconnected spaces; a long exposed concrete box extending into a reflection pool, and a high vertical rendering structure. The simple form and fini...

  • Effect of mesh cladding additive on crack control

    Effect of mesh cladding additive on crack control:Mesh cladding is a new type of surface strengthening technology, but mesh cladding crack is the main problem limiting its application. The participati...

  • What are the punching methods of perforated metal mesh?

    What are the punching methods of perforated metal mesh? 1. Continuous blanking in the same direction: long holes and trimming can be processed by using partially overlapped rectangular punching net di...

leave your message